Did you know that the squeaking you hear from your pipes is the hot water causing the pipe to expand? This and more great plumbing information is provided in this article. If you are looking for clear and concise information, then read the tips we have provided below.
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.
Pump out your septic tank at least every five years to keep it in proper working condition. Regular maintenance will keep sediment from backing up inside of the tank. Sediment can not only cause the sewage in the tank to back up into your house, but it can cause the tank to fail completely. In this case, the cost of prevention definitely outweighs having your septic backing up into your house or failing.
If you are unable to relieve a clogged toilet with a plunger, try pouring a small bucket of water into the bowl from about waist level if the level of water in the bowl is low. After the water level in the toilet bowl has gone down, you can repeat the procedure until the blockage is cleared.
Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.
Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.
Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.
Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.
If you have a crack in your toilet tank, you can sometimes fix this with an epoxy resin. However, it is very difficult to keep up with this type of maintenance, and the best bet may be contacting the supplier and ordering a new tank to be installed in your bathroom. Nevertheless, keeping some epoxy resin on hand for emergencies is a good idea.
During the winter months, your water heater works the hardest. To keep it in optimum condition, flush it out before winter arrives. Flushing the system helps remove the sediment buildup, which causes internal corrosion of your water heater, shortens its lifespan, and reduces heating efficiency. Connect a hose to the faucet near the bottom of the tank and drain several gallons by directing the water into a nearby drain.
If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems.
You should always know where the main water cut-off valve is located on your property. A water meter should be located on or near it. Toilets, sinks and fixtures might have cut-off valves, as well. Make sure every member of the family knows where the values are located, and mark them so they are easy to turn off in case the need arises.
If you have an ice maker or other plumbing going to your refrigerator, every six months or so pull the refrigerator away from the wall and inspect this plumbing. There should be no condensation or corrosion on these plumbing lines, if there is, contact a plumber and have them look at it.
Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.
Keep an eye on the grout between tiles in your bathroom. Watch for cracks and areas where the grout seems to be falling out, and repair them immediately. Small grout crack issues can be easily repaired by pulling out the bad and putting in new grout. Allow any new grout to dry completely before exposing it to water.
When you are working on any kind of plumbing project, you always need a backup person. This is because, when working with water, you never know when an emergency can happen and that second pair of hands can come in very useful! This can even be an unskilled person who can follow directions.
To clear mineral deposits from your showerhead, try a soak in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, ensuring that it is submerged. Leave the bag on for an hour, and the vinegar will dissolve the mineral build-up, allowing water to gush through like it was when it was new.
In conclusion, you now know what causes the squeaking noise from your pipes, as well as a lot more information. Use this guide as the best way to take care of any plumbing issues that might come up. Hopefully, you were able to comprehend the advice given and will be able to fully utilize it whenever needed.